JOIN OUR TEAM

Avatar Engineering was established in 1999 as a custom electronic design and manufacturing solutions partner. We have over 175 years of product design, engineering, and manufacturing experience. We work with clients to design, engineer, manufacture, test, and support each product from beginning to end with our state-of-the-art technology. Avatar is a subsidiary of the Pivot International group of companies.

POSITION SUMMARY:

Responsibilities include assembling electronic components, subassemblies and systems using hand tools, light assembly equipment and lead-free solder stations. Assemblers are expected to follow production work instructions and shop orders to complete product assembly with the highest quality and efficiency.

Essential Job Functions:

• Set up and operate appropriate equipment, tools, and fixtures for product assembly
• Soldering of wires and components to printed circuit boards
• Assembly and soldering of wiring harnesses
• Hand assembly of plastic and metal heat sinks and case parts
• Functional testing of work in progress and completed units
• Packaging of finished goods (box and clamshell)
• Works with production supervisor to ensure product quality by identifying and resolving assembly issues and highlighting continuous improvement opportunities
• Maintain a safe, clean working environment
• Read and apply documented quality system procedures
• Read and understand work instructions and Bills of Material
• Must understand and follow all rules of safety as defined by the employer and required by all applicable regulations.
• Other tasks as required

Requirements:

• High school diploma, GED, or equivalent certificate
• Must be able to read, write, and perform basic mathematical calculations at a high school level
• Pass a Background and Drug Screening
• Soldering experience
• Manual dexterity for working with small components
• Good eyesight including close and distance vision, depth perception, peripheral vision, and ability to adjust focus
• Ability to talk, hear, stand, walk, and sit for long periods of time and perform continuous operations
• Flexible to work in other positions on assembly lines as needed (inspection, testing, packaging, etc.)
• Familiar with component polarities and ability to verify solder and component placement on circuit boards
• Must meet production and quality standards as assigned by the supervisor.

Skills & Desired Qualities:

• Electronics Manufacturing Environments: 2 years preferred.
• Soldering SMT and THT components: 1 year preferred
• Strong attention to detail and consistency
• Positive attitude with ability to function in a team environment.
• IPC-A-610 Certification

Schedule:
Monday – Friday
Occasional weekend overtime
Flexible work hours from 6:00am to 8:00pm

Benefits:

• 401(k)
• Dental Insurance
• Disability Insurance
• Health Insurance
• Life Insurance
• Paid Time Off
• Vision Insurance

Job Type: Full-time

Location: Shawnee, KS

APPLY NOW

Avatar Engineering was established in 1999 as a custom electronic design and manufacturing solutions partner. We have over 175 years of product design, engineering, and manufacturing experience. We work with clients to design, engineer, manufacture, test, and support each product from beginning to end with our state-of-the-art technology. Avatar is a subsidiary of the Pivot International group of companies.

Responsibilities include executing functional testing procedures on PCB Assemblies and final units. Test Technicians are expected to follow production work instructions and shop orders to complete product testing with the highest quality and efficiency.

Essential Job Functions:

• Maintains attention to detail, completing multiple or repetitive tasks. Demonstrates a serious commitment to accuracy and quality while meeting goals or deadlines.
• Exhibits excellent multi-tasking skills. Prioritizes and performs a variety of concurrent tasks with minimal direction.
• Ability to read and interpret circuit schematics and blueprints.
• Ability to set-up and use precision instruments: oscilloscope, function generator, and digital multimeter.
• Has full understanding ESD preventative processes.
• Capable of producing comprehensive documentation.
• Skilled at analyzing complex functions, procedures, and problems to find creative, logical, and effective solutions.
• Capable of taking safety measures and precautions to ensure a safe work environment.
• Ability to meet aggressive deadlines and multiple priorities.
• Demonstrates strong work ethic. Uses time productively to accomplish challenging work goals.
• Understand and have a good working knowledge of industry workmanship standards and soldering techniques in assembly and repair of PCBs.
• Understand and demonstrate a good working knowledge of IPC standards.
• Production testing of all required manufactured assemblies, utilizing existing fixtures and procedures.
• Troubleshoot and rework “failed” assemblies.
• Document existing and new test procedures, working with engineering as needed.
• Work with engineering in development of test fixtures and test procedures.
• Ensure existing fixtures are calibrated, always maintained and functional.

Requirements:

• Must be able to read, write, and perform basic mathematical calculations at a high school level.
• Pass a Background and Drug Screening.
• Manual dexterity for working with small components.
• Good eyesight including close and distance vision, depth perception, peripheral vision, and ability to adjust focus.
• Ability to talk, hear, stand, walk, and sit for long periods of time and perform continuous operations.
• Flexible to work in other positions on assembly lines as needed (inspection, testing, packaging, etc.).
• Must meet production and quality standards as assigned by the supervisor.

Skills & Desired Qualities:

• Electronics Manufacturing Environments: 2 years preferred.
• Strong attention to detail and consistency.
• Positive attitude with ability to function in a team environment.
• 2 year Electronics Technician degree or certification.

Job Type: Full-time

Schedule:
Monday – Friday
Occasional weekend overtime
Flexible work hours from 6:00am to 8:00pm

Benefits:

• 401(k)
• Dental Insurance
• Disability Insurance
• Health Insurance
• Life Insurance
• Paid Time Off
• Vision Insurance

Location: Shawnee, KS

APPLY NOW

Digital Concepts (DCI) was founded in St. Louis, MO in 1990 and specializes in smart control systems, primarily in the fitness industry. In 2020 DCI became part of Pivot International.

Position Summary

The Senior Electrical Engineer will perform all aspects of electronic design, development, validation and support from product inception through manufacturing.  The same individual will be responsible for ensuring the product meets all of the customer's requirements and passes compliance tests.  Comfortable working with motors and of-line power supplies.  Using a working knowledge of schematic capture, analysis tools/instruments, PCB layout, EMC / Compliance to support new and fielded designs with customers and manufacturing plants.

Primary Duties

• Designs, troubleshoots, validates, tests and supports electrical products and systems to ensure the products meet the requirements and quality.
• Responsible for writing supporting technical reports and documentation in support of the designs.
• Collaborates with Mechanical, Firmware and Program Managers, as well as other internal and external partners.
• Ensures the successful design, development, testing and implementation of both product and process changes.
• Identifies issues and uses problem-solving to formulate and implement creative solutions to address electrical safety, EMC requirements, etc.
• Leads small-scale development efforts and projects including planning, scheduling, and documentation required for design control.
• Support Manufacturing plants with needed documentation, test equipment, etc. to ensure successful manufacture of the designs and products.

Bonus

• 4 plus years’ professional experience with the C programming language.
• Embedded software development experience with hard real-time requirements.

Education and Work Experience

• Bachelors or Masters Degree in Electrical Engineering from an accredited engineering school.
• 5+ years of practical engineering experience to include the design and development of electronic systems with proven ability to troubleshoot electronic systems.
• Working knowledge of electronic design principles, analog and digital systems, and PCB manufacturing processes.
• Experience with 1 to 4hp motor control and motors for Brushed DC, Brushless DC and AC Induction motor.
• Experience with active and passive Power Factor Correction (PFC).
• Experience with the design, testing and support of flyback power supplies.
• Experience with multi-meters, oscilloscopes, power meters, dynamometers, spectrum analyzers, high voltage AC (120Vac and 230Vac) and DC (up to 500Vdc) power supplies.
• Experience with design for EMI/EMC and UL and CE.
• Must have proficiency in the use of Microsoft Office applications (including MS Project) and electrical CAD (Altium preferred).

Location: St. Louis, MO

APPLY NOW

Electronic Design & Manufacturing (EDM) is a premier custom and contract manufacturing company. We specialize in the manufacturing of through-hole and surface mount circuit boards, electronic assemblies, and electro-mechanical assembly services. Our customers range from startups to Fortune 500 companies in all segments of industry with manufacturing, engineering design, service and warranty support, and full turnkey product fulfillment. EDM is an ISO9001:2015 registered company.

Responsibilities include assembling electronic components, subassemblies and systems using hand tools, light assembly equipment and lead-free solder stations. Assemblers are expected to follow production work instructions and shop orders to complete product assembly with the highest quality and efficiency.

POSITION RESPONSIBILITIES:

• Set up and operate appropriate equipment, tools, and fixtures for product assembly
• Soldering of wires and components to printed circuit boards
• Assembly and soldering of wiring harnesses
• Hand assembly of plastic and metal heat sinks and case parts
• Operate and supervise automatic epoxy resin potting machines
• Functional testing of work in progress and completed units
• Packaging of finished goods (box and clamshell)
• Works with production supervisor to ensure product quality by identifying and resolving assembly issues and highlighting continuous improvement opportunities
• Maintain a safe, clean working environment
• Read and apply documented quality system procedures
• Read and understand work instructions and Bills of Material
• Must understand and follow all rules of safety as defined by the employer and required by all applicable regulations.
• Other tasks as required

EDUCATION & EXPERIENCE:

• High school diploma, GED, or equivalent certificate
• Must be able to read, write, and perform basic mathematical calculations at a high school level
• Pass a background check and drug screening
• Electronics Manufacturing Environments: 2 years preferred
• Soldering SMT and THT components: 1 year preferred
• Strong attention to detail and consistency
• Positive attitude with ability to function in a team environment
• IPC-A-610 Certification
• Manual dexterity for working with small components
• Good eyesight including close and distance vision, depth perception, peripheral vision, and ability to adjust focus
• Ability to talk, hear, stand, walk, and sit for long periods of time and perform continuous operations
• Flexible to work in other positions on assembly lines as needed (inspection, testing, packaging, etc.)
• Familiar with component polarities and ability to verify solder and component placement on circuit boards
• Must meet production and quality standards as assigned by the supervisor.

PHYSICAL REQUIREMENTS

• This position requires work in a manufacturing environment.
• Interfaces with other managerial, office and hourly employees on a regular basis.
• Requires the ability to visually inspect parts, product, and processes.
• Occasionally lift up to 50 pounds
• Able to visually identify small part markings with the aid of magnification.
• Must wear appropriate Personal Protective Equipment.

Job Type: Full-time

Schedule:

• 8 hour shift
• Voluntary overtime as scheduled.

Location: La Vista, NE

The responsibilities and duties outlined in this position description are a guideline for the general duties of the position and are not exhaustive of all duties inherent in the job. The company reserves the right to modify, amend, alter, or delete any aspect of this position description at any time.

APPLY NOW

Electronic Design & Manufacturing (EDM) is a premier custom and contract manufacturing company. We specialize in the manufacturing of through-hole and surface mount circuit boards, electronic assemblies, and electro-mechanical assembly services. Our customers range from startups to Fortune 500 companies in all segments of industry with manufacturing, engineering design, service and warranty support, and full turnkey product fulfillment. EDM is an ISO9001:2015 registered company.

Utilize SMT machines to place surface mount parts and solder reflow the components to the printed circuit board. Responsible for the set-up of all pieces of equipment on the SMT line, including the screen printer, the pick and place machines, and the reflow oven.

POSITION RESPONSIBILITIES:

• Adhere to all ESD requirements and board handling requirements.
• Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture-sensitive levels (MSL).
• Utilize process sheets to ensure correct build of product.
• Load feeders for surface mount machines using the load list provided by machine.
• Verify correct part numbers are being used for the specific job being run.
• Initiate and select correct programs for SMT screen printer & SMT pick and place machines and correct reflow profile for the reflow oven per work instructions.
• Select the proper stencil screen for use during screen-printing operation.
• Comply with Pivot-EDM’s standards of ESD, IPC-A-610, work instructions, and ISO procedures and policies.
• Perform machine preventative maintenance on-screen printer and pick and place machines based on assigned schedules.
• Operate stencil cleaning machine.
• Clean boards as required based on soldering chemistry.
• Support and follow all ISO standards related to Pivot-EDM’s various Quality Management Systems. These systems may include but are not limited to, quality, the environment, health, safety, and security.
• Support all corporate and site 6S objectives.
• Perform all other duties, as assigned

EDUCATION & EXPERIENCE:

• High School Diploma or GED
• 0 - 6 months previous electronic experience/training provided
• Ability to utilize electronic work instructions
• Ability to utilize SMT line management software
• Pass IPC-A-610 Modules: 1, 2, 4, 7 & 8
• Microsoft Office/computer skills
• Knowledge of machine maintenance

PHYSICAL REQUIREMENTS

• This position requires work in a manufacturing environment.
• Interfaces with other managerial, office and hourly employees on a regular basis.
• Must be able to move about to and spend a significant portion of the shift standing or walking.
• Requires the ability to visually inspect parts, product, and processes.
• Occasionally lift up to 50 pounds
• Able to visually identify small part markings with the aid of magnification.
• Must wear appropriate Personal Protective Equipment.

Job Type: Full-time

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Disability insurance
• Employee assistance program
• Employee discount
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Professional development assistance
• Referral program
• Vision insurance

Schedule:

• 8-hour shift
• Voluntary overtime as scheduled.

Location: La Vista, NE

The responsibilities and duties outlined in this position description are a guideline for the general duties of the position and are not exhaustive of all duties inherent in the job. The company reserves the right to modify, amend, alter, or delete any aspect of this position description at any time.

APPLY NOW

Electronic Design & Manufacturing (EDM) is a premier custom and contract manufacturing company. They specialize in the manufacturing of through-hole and surface mount circuit boards, electronic assemblies, and electro-mechanical assembly services. Their customers range from startups to Fortune 500 companies in all segments of industry with manufacturing, engineering design, service and warranty support, and full turnkey product fulfillment. EDM is an ISO9001:2015 registered company.

EDM is part of Pivot International, a global single-source design, development, engineering, and manufacturing company with over 50 years of experience.

POSITION SUMMARY:

As we continue to grow and scale our operations, we have an excellent opportunity for a new SMT Programmer / Technician in our facility just outside of Omaha, Nebraska. The ideal candidate will have hands on experience working with the manufacturing equipment associated with Electronics manufacturing.

ORGANIZATIONAL RELATIONSHIPS:

This position reports directly to the Operations and Engineering Manager and communicates frequently with employees at all levels. This person must be able to interface effectively with managers, office employees, production employees, suppliers, customers, and other individuals inside and outside of the organization.

POSITION RESPONSIBILITIES:

• Support all aspects of electronic manufacturing, including Surface Mount Technology (SMT), through-hole assembly, convection reflow, through hole, AOI, testing, and conformal coating.
• Resolve manufacturing and process issues.
• Run and debug first piece programs in SMT and associated processes.
• Detail product costs and prepare quoting packages.
• Develop, qualify, and document new manufacturing processes or modify existing processes to fit the requirements of new products.
• Work with NPI groups (internal and external) to develop both hardware and electromechanical assemblies, ensuring the designs are reliable, cost effective, and designed for manufacturability and testability.
• Support Supply Chain with analysis of alternate electrical components and commodity management.
• Identify, design, procure, and validate fixtures & tools. Support factory equipment selection process to meet production plans.
• Initiate, take ownership, and complete technical projects leading to new or improved products or processes.
• Perform process capability assessments and establish methods to control process output.
• Develop, verify, and validate products from process development to successful commercialization.
• Train, develop, and/or provide work direction to operators and technicians.
• Research and recommend new technologies to improve reliability, efficiency and contribute to cost reduction.
• Communicate business and technical needs, status, results, and observations to operating, technical and business teams.
• Responsible for process documentation and ensuring it is kept current like Work Instructions, Standard Work documents, PFMEA, and Control Plans.
• Understand and adhere to the Pivot EDM Quality and EHS policies.
• Participate in and coordinate CI initiatives, Lean Manufacturing, Problem-Solving, Kaizen events and other improvement activities.
• Assist in identifying and prioritizing opportunities to improve customer satisfaction, increase net income, enhance productivity, and further employee performance.
• Act as a technical resource for daily electronic manufacturing activities.
• Serve as the point of contact for specific project initiatives and best practices.

EDUCATION & EXPERIENCE:

• Associates or technical degree in an engineering equivalent or combination education and experience.
• 2 – 3 years of experience in printed circuit board assembly processes. Preferably in programming SMT process equipment used in PCBA manufacturing: Pick and place, solder paste, thermal profile monitoring.
• Ability to teach others.
• Able to interpret and create electronic schematics, assembly, and fabrication drawings.
• Basic working knowledge of printed circuit board manufacturing including Gerber files and CAM software.
• Basic working knowledge of CAD (SolidWorks or other) software.
• IPC 610 knowledge

PHYSICAL AND MENTAL REQUIREMENTS

Mental:

• Performs highly complex and varied work in the office and manufacturing setting in a variety of situations as well as exercise of independent judgment.
• Must have the ability to analyze situations and respond to problems to ensure internal and external customer requirements are met.
• Must be able to make decisions and judgments based on data or, in some instances, a lack of data.

Physical:

• This position requires work on the factory floor in an environmentally controlled manufacturing environment.
• Interfaces with other managerial, office and hourly employees on a regular basis with various forms of communication.
• Must be able to move about to accomplish facility/customer or supplier tours and evaluations. Requires the ability to visually inspect parts, product, and processes.
• Occasionally lifts 25 pounds and may stand or sit for sustained periods up to several hours.
• Must be able to work in front of a computer.
• Must wear appropriate Personal Protective Equipment.

Job Type: Full-time, first shift

Benefits:

• Company quarterly incentive compensation bonus
• 401(k) matching
• Dental insurance
• Paid time off
• Disability insurance
• Employee assistance program
• Flexible spending account/ Health savings account
• Health insurance
• Life insurance
• Vision insurance

Location: La Vista, NE

The responsibilities and duties outlined in this position description are a guideline for the general duties of the position and are not exhaustive of all duties inherent in the job. The company reserves the right to modify, amend, alter, or delete any aspect of this position description at any time.

APPLY NOW